SCM K208 ER edgebander, corner rounding
- Product Ref: 8299
- Our Price: £12750.00
Features
GLUE POT UNIT, EDGE LOADING AND PRESSING SYSTEM:
Hot melt glue pot internally teflon-coated to allow an easy and quick glue replacement
- glue spreading roller with heating element for a perfect control of the temperature of the applied glue
END CUTTING UNIT with two independent high frequency motors to cut the front and rear exceeding edge.
Tiltable motors with "autoset" from control panel from 0 to 15 degrees without utilizing any type of spanner.
It is possible to end cut also soft/post formed panels.
TILTABLE TRIMMING/CHAMFERING UNIT "RK-900"
with two high frequency motors:
- tiltable unit for the trimming/chamfering of the top and bottom exceeding edge.
- "ROUND K" CORNER ROUNDING UNITS
automatic rounding of the applied edge angles without stopping the workpiece. It allows the rounding up to 3 mm PVC/ABS and
thin edges applied on straight sides of post/soft formed panels
The rounding operation takes place in one single pass (each side)
RADIUS EDGE SCRAPING UNIT for the finishing of radius PVC/ABS edges.
BRUSHING UNIT with two independent motors for the cleaning/polishing of the edge
Specification
TECHNICAL FEATURES:
- panel thickness:
- working with "ROUND K" unit 10-45 mm
- working without "ROUND K" unit 10-55 mm
- thickness for rolled edges max. 3x45 mm
- thickness for edges in strips max. 12 mm
- max. exceeding material
to the panel thickness 4 (2+2) mm
- min. edge length with 3 mm rolled edge 250 mm
- min. working width:
for thin edges (min. length 200 mm) 55 mm
for edges in strips (min.length 200 mm) 80 mm
- min. working length:
for thin edges (min. width 80 mm) 140 mm
for edges in strips (min. width 90 mm) 200 mm
- feed speed 13 m/min
- pneumatic operating pressure 6 bar
- protrusion of panel from track (working line) 23 mm
- min. distance between two panels 500 mm
GLUE POT UNIT
- heating time approx. 10 min
- glue granules capacity 1,5 kg
- absorbed power 2,8 kW
END CUTTING UNIT
- motor power 0,35 kW
- speed of cutters 12000 rpm
- manual tilting 0-15 deg
TILTABLE TRIMMING UNIT/TILTABLE CHAMFERING UNIT
- motor power 0,5 kW
- speed of cutters 12000 rpm
- tilt (only on chamfering unit) 0-15 deg
"ROUND K" ROUNDING UNIT
- motor power each 0,55 kW
- speed of cutters 12000 rpm
- max. working edge thickness 3 mm
EDGE SCRAPING UNIT
- knives with radius 3 mm
BRUSHING UNIT
- motor power 0,25 kW
- speed 3000 rpm
Installed power
"ER" comp. 6,8 kW