SCM K208 ER edgebander

  • Product Ref: 7790
  • Our Price: £12750.00

Features

GLUE POT UNIT, EDGE LOADING AND PRESSING SYSTEM:

Hot melt glue pot internally teflon-coated to allow an easy and quick glue replacement

- glue spreading roller with heating element for a perfect control of the  temperature of the applied glue

END CUTTING UNIT with two independent high frequency motors to cut the front and rear exceeding edge.

Tiltable motors with "autoset" from control panel from 0 to 15 degrees without utilizing any type of spanner.

It is possible to end cut also soft/post formed panels.

TILTABLE TRIMMING/CHAMFERING UNIT  "RK-900" 

with two high frequency motors:

- tiltable unit for the trimming/chamfering of the top and bottom   exceeding edge.

- "ROUND K" CORNER ROUNDING UNITS

 automatic rounding of the applied edge angles without stopping the workpiece. It allows the rounding up to 3 mm PVC/ABS and 

  thin edges applied on straight sides of post/soft formed panels  

  The rounding operation takes place in one single pass (each side)

RADIUS EDGE SCRAPING UNIT for the finishing of radius PVC/ABS edges.

BRUSHING UNIT with two independent motors for the cleaning/polishing of the edge

 

 


Specification

TECHNICAL FEATURES:

 

- panel thickness:

   - working with "ROUND K" unit                               10-45           mm

   - working without "ROUND K" unit                          10-55              mm

- thickness for rolled edges                               max.   3x45             mm

- thickness for edges in strips                           max.  12                mm

- max. exceeding material

  to the panel thickness                                              4 (2+2)          mm

- min. edge length with 3 mm rolled edge               250             mm

- min. working width:

  for thin edges (min. length 200 mm)                         55                mm  

  for edges in strips (min.length 200 mm)                    80                mm

- min. working length:

  for thin edges (min. width 80 mm)                            140              mm

  for edges in strips (min. width 90 mm)                     200              mm

- feed speed                                                                13                m/min

- pneumatic operating pressure                                  6                  bar

- protrusion of panel from track (working line) 23                 mm

- min. distance between two panels                            500              mm

 

GLUE POT UNIT

- heating time                                        approx.         10               min

- glue granules capacity                                              1,5               kg

- absorbed power                                                        2,8               kW

 

END CUTTING UNIT

- motor power                                                             0,35             kW

- speed of cutters                                                        12000             rpm

- manual tilting                                                          0-15             deg

 

TILTABLE TRIMMING UNIT/TILTABLE CHAMFERING UNIT

- motor power                                                             0,5               kW

- speed of cutters                                                        12000             rpm

- tilt (only on chamfering unit)                                    0-15             deg

 

"ROUND K" ROUNDING UNIT

- motor power                                                  each   0,55             kW

- speed of cutters                                                        12000              rpm             

- max. working edge thickness                                   3                  mm

 

EDGE SCRAPING UNIT

- knives with radius                                         3                   mm


 

BRUSHING UNIT

- motor power                                                             0,25             kW

- speed                                                                       3000            rpm

 

Installed power                           

                                                   "ER" comp.              6,8               kW    

Sales Enquiry

  • SCM K208 ER edgebander (Product Ref:7790)