Biesse Rover A 2231 G FT CNC nesting cell

  • Our Price: £85000.00

Features

Superb nesting cell in excellent condition;

Scissor lift platform with auto loading into CNC;

Automatic labelling device.

5 axis CNC for jumbo sheets with toolchanger / drill block.

Automatic offloading and belt conveyor.

Specification

TECHNICAL SPECIFICATIONS:

Maximum axes speed X - Y - Z: 80 m/min - 60 m/min - 20 m/min

3-4 axes version:

Z axis stroke = 325mm - Z axis piece passage = 170mm

Z axis piece passage with Sweeping arm = 120mm (without spoilboard)

5 axes version:

Z axis stroke = 430mm - Z axis piece passage = 200mm

Z axis piece passage with Sweeping arm = 120mm (without spoilboard)

* The technical data shall be verified on detailed layout according to the operating units chosen on

the machine.

9080355 1

Numerically controlled machining centre ROVER A 2231 G FT

FT worktable dimensions: X = 3100 mm; Y = 2205 mm

7550008 1

Presetter for the measurement of the tool length with diameter up to 130mm

Digital device for tool length measurement by contact plate.

The device checks the tool length and updates the values in the tool schedule of Numerical Control.

The diameter of the contact plate is 130mm.

We recommend the use of the blowing device for the cleaning of the reading surface.

The measurable lengths (min/max) must be verified on the specific layout.

*Includes a special toolholder for the device setting

7300965 3

300 m3/h rotary vanes vacuum pump

Oil-Free operation through non-contacting claws which grants high efficiency without the need of

lubrication.

Flow rate:

300 m3/h at 50Hz

360 m3/h at 60Hz

* Requires the vacuum locking system if not included in the base machine configuration

7350743 1

Division of the vacuum system into 2 work areas and 2 locking areas in X (pendulum

machining)

Inclusive of:

1 linear back stop for RH area

1 linear front stop for RH area

2 RH side stops

Code / Description Quantity

System for the division of the FT table in 2 locking areas

The additional stops, with pneumatic lowering, creates 2 additional origins for the correct reference

of panels. The stops are automatically raised based on origin selection.

The division in 2 locking areas allows the independent locking of up to 2 pieces on the work table, to

be machined as follows:

single program for 2 pieces (no pendulum machining)

2 programs, for 1 piece each, if pendulum machining is required

The pieces are locked by pressing the pedal placed near the area to be activated.

Total stops present:

Qty 12 for size 2231; Qty 16 for size 2243; Qty 17 for size 2264

7350745 1

Row of 6 additional stops positioned inside the FT worktable and 2 additional side stops

The additional stops row is positioned at 1763mm along Y and has a height of 104mm above the

table

The additional side stop is positioned at 1687mm along Y and has a height of 92mm above the table

The additional stops row creates 2 extra origins inside the FT table, one on each side of the

machine, which can be reached by all the operating units.

* Requires the additional RH area stops kit or the division into 2 work areas and 2 locking areas

* Requires the extensions for pneumatic stops

* Requires the increment of 8 sensors for the detection of lowered stops, if selected

7350746 1

Multizone vacuum system with 16 areas

The FT working table is divided into 16 zones, each of which is activated independently by the NC,

granting the best vacuum optimization.

It allows the locking of panels with different dimensions minimizing vacuum dispersion, without any

operator intervention.

* Requires the division of the vacuum system into 2 work areas and 2 locking areas in X

7800282 1

Configuration 3

Front Loading

Flow from Right to Left

Determines the workflow of the machine and the disposition of the selected automatic loading and

unloading systems.

*Requires the reference stops and origins for RH area or the division of the vacuum system into 2

work areas and 2 locking areas in X

7200223 1

Automatic Loading and Unloading System - Type B

Compatible with:

Conf. 2 - Rear Loading - Workflow from Left to Right

Conf. 3 - Front Loading - Workflow from Right to Left

Inclusive of:

Sweeping arm for panel unloading and spoilboard cleaning

Loading Vacuum cups system

Central linear reference stops for piece containment during unloading cycle

Pneumatic vertical movement of the safety strips

Loading station with automatic alignment along X and Y

MDF connection table between the machine and the loading station

Photocell barrier and additional safety fence

Prearrangement for Scissor Lift

Prearrangement for automatic adhesive label printing and application system

Prearrangement for unloading belt

The loading station with automatic alignment along X and Y is capable of correctly position the top

Code / Description Quantity

panel of the stack and eventually perform the application of adhesive labels.

The panel alignment and labels application operations are performed in masked time while the

machine is already processing the previously loaded panel.

The loading vacuum cups system is capable to pick a pre-aligned panel from the Scissor Lift and

position it automatically on a machine origin for a correct processing.

The unit is made of 5 vacuum cups along the Y axis of which the last 3 can be manually disabled

through a valve for panels with smaller dimension.

It is possible to automatically load up to 3 panels with three consecutive single loading cycles.

The Sweeping Arm can automatically unload the processed panel on the unloading belt positioned

beside the machine.

Simultaneously to the unloading operation, the Sweeping Arm can perform the spoilboard cleaning,

allowing the loading of the next panel without performing any manual cleaning operation.

The linear reference stops act as a guide for the worked pieces and avoid any part to fall from the

table during unloading operations

If the unloading belt is NOT purchased together with the machine, an additional button pad with 2-

hands control to ensure the safety of the operator during the unloading cycle is provided.

Technical specifications:

Thickness of single panel unloading: from 9 to 50mm

Maximum thickness of multiple panels loading: 20mm

Maximum thickness of multiple panels unloading: 60mm

Spoliboard thickness: from 8 to 25mm

Maximum unloading weight: 200Kg

Minimum loadable Y axis dimension of the panel: 800mm

Total stops present:

Qty 12 for 2231 machine; Qty 16 for 2243 machine; Qty 17 for 2264 machine

*Requires Conf. 2 or 3 to determine the workflow

*Requires the selection of the sensors for the detection of lowered stops

*Scissor Lift NOT included

*Automatic adhesive label printing and application system NOT included

*Unloading Belt NOT included

7200217 1

Upgrade for Steel connection frame with wheels for Loading station type B

The frame, made of steel, is equipped with freewheels which reduces panel's friction during the

loading cycle.

The wheels of the same row have a pitch of 102mm.

Replaces the Machine connection frame with MDF table.

*Requires the Loading station type B

7200213 1

Scissor Lift - For 2231 machine

Single scissor version.

The Scissor Lift consists of a top frame for panels stack positioning that can be accessed by a forklift

and a lifting system moved by a piston and hydraulic pump system.

Combined with the panel stack reference and alignment system in Y direction, the Scissor Lift is

capable to lift the stack to the correct quote for alignment and machine loading operations.

The Scissor Lift is equipped with a plate with levelling feet for correct installation and alignment with

the machine.

Technical specifications:

Maximum loadable panel dimension = 3100x2200mm

Minimum loadable panel dimension = 2000x800mm

Maximum panels stack height = 620mm

Maximum payload = 3000Kg

Scissorlift height in rest position = 380mm

Maximum panel squaring tolerance = minor or equal to 1mm/m

Quote Ref ACOF004477 - Page 14 of 44

Code / Description Quantity

Planarity tolerance for each panel = maximum 2mm

*The stack can consist of panels with different dimensions within the limits stated above

*Panel's dimension along X must be equal or greater of the dimension along Y

7200183 1

Auxiliary working station for nesting pattern visualization and adhesive labels printing

Manual labels application.

Inclusive of:

Label printer

19'' Touch-screen monitor

Mouse and Keyboard

The auxiliary working station is positioned beside the Unloading Belt Conveyor and automatically

shows the unloaded nesting pattern.

The operator by selecting the desired piece on the touch screen, can print the corresponding label;

at the same time, in order to avoid re-printing of the same label, the colour of the piece on the screen

changes.

Technical specifications:

Minimum label dimension = 50x50mm

Maximum label dimension = 100x100mm

Printer resolution = 200dpi

* The auxiliary working station is remotely connected to the machine's PC

* Not compatible with the automatic adhesive label printing and application system with 0-90°

rotation for Loading station type B

7200198 1

Outfeed Belt Conveyor - For 2231 machine

Outfeed belt conveyor length 3600mm.

Inclusive of:

Supporting frame in electrowelded metal structural work

Motorized unloading belt controlled by the machine's N.C.

Safety devices compliant with the EC regulations

Additional dust collection system

The Outfeed Belt Conveyor can receive the nested components from the machine and move them

outside the working area, dramatically reducing the idle time between the execution of a program

and the following one and therefore increasing machine's productivity.

During the unloading cycle the belt is moved to reduce friction and prevent panel's drag. At the end

of the Conveyor Belt, a photocell stops the movement when the panels reaches the end.

The Outfeed Belt Conveyor is accessible from 3 sides for an easy and ergonomic unloading

operation, furthermore it is possible to manually activate the belt's movement through a pedal until

the remaining panels reaches the photocell allowing performing the unloading operation completely

from the far end of the Belt Conveyor.

The additional dust collection system covers the whole Y axis working field of the machine and it's

automatically activated during the unloading cycle; by collecting the remaining dust it grants a much

cleaner panels output.

Combined with the Automatic Loading and Unloading system, the Outfeed Belt Conveyor allows the

machine to perform the loading and unloading operations simultaneously, increasing cell's

productivity.

*Maximum unloadable panel 3100mm

*Incompatible with the Rollers Hold-Down Unit

*Requires the Sweeping Arm or the Automatic Loading and Unloading system - Type A or B

7350053 20

SENSOR for the detection of lowered stops.

One sensor on each stop the machine is equipped with should be selected.

Quote Ref ACOF004477 - Page 15 of 44

Code / Description Quantity

* Obligatory for 5-axes machines or Edge machines

7350494 8

Vacuum module holder for FT work table - H= 16 mm

The square base, dim. 132x132 mm, allows an easy and quick application of the holder on the FT

work table channels with 30 mm pitch. The thickness of the holder is 16 mm. The supporting surface

on the FT table, in high friction material, grants a secure locking of the piece to be worked.

The top surface of the holder reproduces exactly the surface of the base for vacuum modules sliding

on the ATS panel supports, with all its advantages.

For vacuum modules H = 29mm, H = 48 mm and H = 74 mm.

7350088 8

Vacuum module - Size 132x146 - H48mm

The grid on the surface allows the configuration of the vacuum area according to piece shape and

dimensions, and grants a secure locking thanks to the presence of rubber inserts which increase the

friction between piece and module.

Each module can easily be removed and rotated through 360°, with a step of 15°.

The total height, carriage included, is 89.5mm.

7212807 1

13 kW (17,4 HP) operating unit with 5 interpolating axes, HSK F63 adaptor and liquid cooling.

This unit allows the numerically controlled interpolation of the electrospindle on 5 axes.

A Brushless motor controlled by a digital drive and a Harmonic Drive reduction unit with no

backlashes control the orientation of the operating unit.

The 5-axes operating unit is fixed directly to the vertical carriage (Z axis) with no interposed

pneumatic movements, and therefore with no additional tolerances which could negatively influence

the group rigidity and the working precision. Thanks to its relatively small dimensions, this unit can

reach parts of the pieces to be worked which other types of 5-axes units available on the market

cannot reach. The electrospindle is equipped with ceramic bearings, which can work at a very high

rotation speed, with a pressurization system which protects it from dust and with a blower which

cleans the tool-holder during tool change. The dissipation of the heat produced by the electrospindle

during machining operations is granted by a closed circuit system for liquid cooling. The 5-axes

operating unit does not require any periodic lubrication, since its components are lubricated for life.

In addition to the standard tests normally performed by BIESSE, the running tests of a machining

centre equipped with the 5-axes operating unit include circular interpolation tests carried out by

means of electronic equipment and BALL-BAR system, in compliance with the UNI ISO 230-4:1998

norm.

Technical specifications:

11 kW (15 Hp) at 12.000 rpm in S1 duty

13 kW (17,4 Hp) at 12.000 rpm in S6 duty

Max. rotation speed: 20.000 rpm

C axis: 360° non-stop rotation

C axis rotation speed: 12.4 rpm

B axis positioning: +/- 100°

B axis rotation speed: 12.4 rpm.

The programming of workings which require the angular positioning of the 5-axes operating unit can

be performed through the BiesseWorks Advanced programming system, which allows to:

define a "virtual" face with a specific orientation in space and program the workings to be carried

out on that face;

define the unit orientation and perform its angular positioning.

The programming of workings which require the interpolation on 4 or 5 axes of the operating unit can

be performed through specific software to be chosen among those available on the market, to be

approved by BIESSE.

This software would also control the angular positioning of the unit, as an alternative to the

Quote Ref ACOF004477 - Page 16 of 44

Code / Description Quantity

BiesseWorks Advanced system.

During the execution of a program, the numerical control automatically checks the possible collisions

of the 5-axes operating unit with the work table. Since this control is quite precautionary, the

possibility of the operating unit to perform particular workings might be limited by the NC: the

operator can however carry out the program, after checking the actual possible collisions by him.

*Requires BiesseWorks Advanced version or another external software package approved by

BIESSE to manage the 5 axes operating unit.

*Requires the remote keyboard

*Requires the liquid cooling box or the heat exchanger

*Requires sensors on all the pneumatic stops

*On FT machines requires the additional row of stops placed in the worktable

*On FT machines requires the extensions for pneumatic stops

7210041 1

Flange for the assembly of aggregates on an operating unit with 5 interpolating axis

The Flange is mounted on the operating unit with 5 interpolating axis and is equipped with 4 conical

slots for aggregate reference every 90°.

*Aggregates can be used only when the electrospindle is in vertical position

*Requires the operating unit with 5 interpolating axis

7570016 1

Liquid chilling unit for liquid cooled systems

The liquid chilling unit is equipped with a visual indicator for liquid level and is capable to chill two

electrospindles or one electrospindle and one liquid cooled boring head.

The liquid chilling unit grants a longer life to the units even during the most severe operation by

keeping the temperature within the normal levels.

The system has an internal flow control which can pop-up warning message on the N.C. screen if the

flow is not sufficient.

Power consumption: 1600W

7212078 1

Additional Z carriage for front operating units, controlled by an independent Z axis.

This carriage can fit the boring unit.

The N.C. controls the descent of the carriage, which is performed by means of a Brushless motor

and a ball screw.

The boring unit is fixed directly to the front Z carriage, which vertical movement is controlled by an

independent Z axis, resulting in increased productivity.

The presence of the additional Z carriage allows the future installation of front operating units.

* Retrofitting not available

7200062 1

BH17 L Boring Head

Working unit which can be equipped with 17 independent tools for single and multiple borings on 5

panel sides, and with a sawblade for grooves along X direction on panel's top face.

The spindles have a Rh/Lh alternated rotation and are driven by precision helical ground teeth gears

which grants minimum noise emission and maximum machining accuracy.

The unit is composed of:

10 vertical independent spindle with a pitch of 32mm (5 spindles along X axis and 5 spindles

along Y axis)

3 horizontal independent spindles with double outlet with a pitch of 32mm, (2 oriented along

X axis and 1 oriented along Y axis)

1 sawblade with diameter 120mm for grooves along X axis (maximum cutting depth 25mm)

The spindles are driven by 1 inverter controlled motor (motor power 1.7 kW at 2800 rpm - 3 kW at

6000 rpm): the spindles rotation speed is programmable up to 6000 rpm to perform fast drilling

cycles and reduce machining time. Furthermore it is possible to program the correct rotation speed

based on the tool and material to be processed.

Quote Ref ACOF004477 - Page 17 of 44

Code / Description Quantity

*Requires the additional Z carriage for machines with 2 independent axes

*Not compatible with Multifunction units

7291163 1

16 positions Revolver Toolchanger, positioned on the X axis carriage

Onboard of the X axis carriage, allows to store up to 16 tools always available on each position of

the machine and to perform toolchanging operations in a short time.

Technical specifications:

· Wheelbase between grippers: 114mm

· Maximum loadable tools: 16 with 110mm maximum diameter

· Loadable aggregates: Refer to the toolchanger layout

· Maximum tool diameter: Refer to the toolchanger layout

· Maximum tool length: Refer to the toolchanger layout

· Maximum weight of a tool or aggregate inclusive of the tool: 7,5Kg

· Maximum total weight: 55Kg

If the standard chip deflector is loaded on the toolchanger, the two adjacent grippers must be

manually removed.

* Incompatible with the 14 or 21 positions chain toolchanger, positioned on the X axis carriage

7270063 3

TOOL-HOLDER WITH HSK F63 ADAPTOR ERC 40

RH rotation

For tools with cylindrical connection and diameter from 6 to 25 mm.

The collet is not included.

It includes:

Ring nuts with bearing, to guarantee superior locking strength without deforming the elastic collet.

This solution grants greater precision and balancing.

Cone / ring-nut balancing degree = G 2.5

Surface burnishing to prevent oxidation.

* Max. rotation speed: 24.000 rpm

3407080 2

ERC40 elastic collet for tool locking diameter 12-13mm

Once equipped on the toolholder, on the manual toolchange electrospindle or on the aggregate, the

elastic deformation of the collet allows a perfect tool locking.

The diameter of the lockable tool is within the specified range.

3407082 1

ERC40 elastic collet for tool locking diameter 15-16mm

Once equipped on the toolholder, on the manual toolchange electrospindle or on the aggregate, the

elastic deformation of the collet allows a perfect tool locking.

The diameter of the lockable tool is within the specified range.

7000201 1

Automatic lubrication system

At each set time interval, adjustable in the numerical control, the pump automatically sends the

lubricant to the machine moving parts (linear guides and bearings, recirculating ball screws), with no

machine downtime and no operator's intervention.

When the quantity of lubricant in the tank reaches the minimum, a warning message appears on the

N.C. screen.

7000059 1

Controls on remote keyboard

Keyboard controlling the main functions available for work area set-up, operating unit tooling and tool

changers tooling.

Quote Ref ACOF004477 - Page 18 of 44

Code / Description Quantity

The remote keyboard has an ergonomic shape, an easy-to-read display and is equipped with a

magnetic device for its positioning on the panel support handles or the electric cabinet.

It includes an emergency push-button, 2 potentiometers and membrane keys to access the menus

available on the display; 3 programmable keys allow the immediate access to the most used

functions.

It allows the operator to:

reset the axes

move the axes in manual mode

adjust the axes speed by means of a potentiometer

adjust the electrospindle rotation speed by means of a potentiometer

control the vertical movement of the spindles of the boring unit for tooling purposes

lock and unlock the tool on the electrospindle

control the vertical movement of the dust extraction hood during the work phases, for the visual

control of all the operations being performed on the test panel

display all information relating to the work area set-up: panel supports positioning dimensions

along the X axis, sliding bases positioning dimensions along the Y axis, type of vacuum module

positioned on each sliding base with the respective orientation

check the state of input and output signals

activate the belt for the removal of chips, if present

perform tool change operations.

* If present, the selectors for the selection of the locking areas are not enabled.

7530075 1

SOFTWARE UPDATE from BiesseWorks (machine version) to BiesseWorks Advanced (machine

version).

BiesseWorks Advanced includes the following additional functions with respect to BiesseWorks:

Guided creation of customized parametric macros, with the possibility of recalling them through

icons which can be included in the software interface;

3D simulation of the tool path, to allow the operator to check on the PC the real situation onboard

the machine, thus detecting of any errors in advance;

Approximate calculation of machining time;

Parametric programming of the work area: by changing the parameters the programs

automatically adjust both the workings and the positioning of the elements on the work area;

Automatic pocketing of any shape with the possibility of leaving islands in relief at different

depths;

Text engraving using Windows True Type Fonts;

Possibility of defining rotated or circular faces in addition to the six standard faces available in

the editor. Programming for these faces is entirely similar to programming the standard faces;

Programming of the chip deflector aggregate.

Compatible with NC1000 rel. 2.0.0.1 or updated.

7530074 1

BIESSEWORKS - Advanced programming system - office version (2 hardware keys).

Compatible with the numerical controls BH660, XP 600, NC1000, Xnc, Xnc Compact rel. 2.0.0.0 and

updated.

It requires the operating system Windows XP.

* For NC BH660, XP600 and NC1000 it requires BiesseWorks Advanced - machine version.

The graphic interface, fully compatible with the Windows standard, grants the following functions:

Assisted graphic editor for the programming of boring, cutting and routing operations. The Editor

handles multiple documents, so it is easy to copy a machining operation from one document to

another through the Windows copy/paste functions;

Interactive graphic views with zoom function. It is possible to select machining operations

graphically and modify their technological parameters;

Automatic optimization of borings, tool changes and tool routes;

Possibility of defining the work sequence with the mouse, by selecting the workings from a list;

Quote Ref ACOF004477 - Page 19 of 44

Code / Description Quantity

Parametric programming, with the possibility of specifying the values of the parameters when a

parametric program is run;

Management of sub-programs: insertion of different bbp programs into a single program with

optimization of sequential processes;

Import of files from CAD and other outside software systems in DXF, CIX and CID3 format. DXF

files can be purely geometric or can contain all the technological parameters necessary for

machining;

Conversion of groups of DXF, CIX and CID3 files with no need of importing them one by one

(batch-run module);

Possibility of executing DXF, CIX and CID3 files directly;

Automatic calculation of the position of panel supports and sliding bases at the "start" of the

program

Graphic configuration of machine data;

Tool database with search filters helping tool selection. It is possible to associate a shaped

profile in DXF to every tool and automatically generate its 3D representation;

Mouse selection for operating units and tool changers tooling operations;

Graphic set-up of panel supports: immediate detection of tool collisions with piece locking

devices, automatic generation of the set-up on symmetric or translated origins and possibility of

defining the rotation of the vacuum modules.

BiesseWorks Advanced also includes:

Guided creation of customized parametric macros, with the possibility of recalling them through

icons which can be included in the software interface;

3D simulation of the tool path, to allow the operator to check on the PC the real situation onboard

the machine, thus detecting of any errors in advance;

Approximate calculation of machining time;

Parametric programming of the work area: by changing the parameters the programs

automatically adjust both the workings and the positioning of the elements on the work area;

Automatic pocketing of any shape with the possibility of leaving islands in relief at different

depths;

Text engraving using Windows True Type Fonts;

Possibility of defining rotated or circular faces in addition to the six standard faces available in

the editor. Programming for these faces is entirely similar to programming the standard faces;

Programming of the chip deflector aggregate

Min. PC requirements:

- Pentium processor 2 Ghz or equivalent

- 512 Mb RAM (1 Gb advised)

- 1 Gb of free disk space

- graphic card with at least 128 Mb of RAM advised

 

Sales Enquiry

  • Biesse Rover A 2231 G FT CNC nesting cell